Change up the color of your The Beast® Blower with these easy to change end caps. Mix and Match colors to customize your blower how ever you choose.

Includes:
2- Intake Grills -metal
2- Intake Grills – plastic
1- Rear Grill
1- 3/16 Hex Key
1- 3/32 Hex Key

Instructions:
Step 1: Remove Air Filter
Step 2: Using the 3/16 hex key provided, remove the 4 screws from the side bumper and set bumper face down.
Step 3: Using the 3/32 hex key provided remove the 4 smaller screws on the inside of the bumper.
Step 4: Remove plastic grill and metal grill and replace with desired color combinations.
Step 5: To Reattach- place desired metal grill into bumper followed by the desired plastic grill.
Step 6: Tighten down the small screws using the 3/32 hex key. Do not over tighten.
Step 7: Making sure the air filter slot is facing towards the top of the blower, slide the bumper back onto the unit and tighten screws using 3/16 hex key. Do not over tighten.
Step 8: Insert Air Filter.